Used plastic to oil recycling machine product introduction
Used plastic to oil recycling machine
Plastic products has been used widely, and waste plastic can be seen everywhere. It has seriously affected our environment on two aspects, such as visual pollution and potential hazards. Visual pollution means that aesthetic perception on living city affected by used plastic in everywhere.Used plastic to oil recycling machine has supplied a new solution on disposal of waste plastic.
Used plastic to oil recycling machine in customer factory
The used plastic to oil recycling machine can recycling waste plastic to fuel oil and carbon black. Nowadays, Used plastic to oil recycling machine uses pyrolysis technology. Pyrolysis is a chemical process, converting high- molecular compound into other low molecular compound by heat energy.
Used plastic to oil recycling machine is pyrogenic decomposition of waste plastic, depolymerizing agent and catalyst; then macromolecule waste plastic will be converted into micromolecule fuel oil.Doing group used plastic to oil recycling machinetakes full advantage of this technology.
Used plastic to oil recycling machine working process :
Used plastic to oil recycling machine working process
1. Put raw materials into reactor by auto-feeder, then heat the reactor with any one of the following fuel materials: coal, wood, natural gas, oil. Do not stop heating the reactor, when the temperature reaches nearly 250 degree Celsius, waste plastic will be transferred to oil gas.
2. The liquid oil will be cooled by condenser from oil gas and then collected by oil tank. Third, the exhaust gas which can not be cooled in normal pressure will be recycled to heat the reactor. In this way, you can not only saving energy, but also protecting environment.
3. Smoke produced by processing the plastics can achieve national emission standard through dual desulfurization and dusting removal device.
4. After you get crude oil, the temperature will be low, at this time, carbon black will be discharged automatically. Last, when the temperature falls to 100 degree Celsius, After all these steps, you can start another batch.
Fuel oil apllication
Fuel Oil (40% to 45%) The main oil product produced by our recycling application is the fuel oil that is wide used for industrial and commercial purposes. The oil has 40% to 45% of the amount of recycled scrap tyres, which will be carried with licensed tanker trucks.
Carbon black application
Carbon Black Powder (30% to 35%) The second product of used plastic to oil recycling machine is carbon black. The quantity of carbon black is about 30% to 35% according to plastic quality. The use of carbon black is as a chemical strengthener in rubber and coloring agent in pigment industries. This carbon black price is very competitive compare to petroleum carbon black, so our pyrolysis carbon black is good option in stead of petroleum carbon black.