Pyrolysis Plant FAQ /Technology
Many people know that we can get liquid fuel from the waste tire pyrolysis machine. So how to get liquid fuel out of waste tire pyrolysis machine? Maybe some people don't know the working processing of the waste tire pyrolysis machine.
The specific working processing is as follows:
Working process of waste tire pyrolysis machine
1.First use an automatic feeder or manually feed waste tires into the reactor, and after the completion of the feeding, close the reactor door.
2.Turn on the burner to preheat the reactor. After preheating for a period of time, tail gas will be generated. Then turn on the tail gas spray gun to use the generated tail gas to heat the reactor, which can save more than half of the fuel.
3.After reaching a certain temperature, the oil gas in the tire will be cracked, and the cracked oil gas will be cooled into liquid fuel through the condensation system and collected in the oil tanks.
4.When the oil cracking process is over, turn off all the burners, turn on the cold air system to cool down the reactor. Then turn on the negative pressure system to pump out the remaining oil gas in the reactor, cool the remaining oil gas into liquid fuel through the cooling system, which not only improves the oil yield, but also ensures that it is safe and odorless when opening the furnace door. And then discharge and collect the carbon black through the carbon black elevator or air transport system, and draw out the steel wire in the reactor through a hoist or steel wire puller.
Pyrolysis oil application
Now you should know how to get liquid fuel from the waste tire pyrolysis machine. The liquid fuel has great market value, it is widely used in boiler factory, cement factory, steel factory, brick factory, glass factory, heavy oil power plant, warm supply center and so on.
If you want to get liquid fuel from tire, please contact us in time for more details about the waste tire pyrolysis machine.