Pyrolysis Plant FAQ /Technology

FAQ of pyrolysis plant / DATE:2018/4/10

plastic pyrolysis 1.jpg

Convert plastic to oil machine

Convert plastic to oil machine is chemical technology for converting waste plastic into Pyrolysis Oil, Carbon Black and Hydrocarbon Gas. This reaction takes place inside pyrolysis reactor. Following reaction conditions are essential for conversation of plastic to oil.

Convert plastic to oil machine working process

convert waste plastic to oil

Convert waste plastic to oil machine working process

Step -1

Put plastic material into the pyrolysis reactor by mechanical feeding machine or manual, then it is delivered into the store bin with the help of conveyor belt. Then, close the feeding door and open heating system of the machine.

Step – 2

In this step, two stages are there in the process. The primary stage: the heat energy needs to start with 100 degree Celsius and ending with 250 degree Celsius. In 100 degree Celsius, the oil gas will release and in 120 degree Celsius the liquid oil will release. The secondary stage: the heat energy needs to change from 250 degree Celsius towards 280 degree Celsius; it is the peak output rate. The oil gas will be collected into the manifold, and the oil as well as the weighty particles are accumulate and dissolved in the center of the manifold and drop into the deep oil container (oil tank). And the lighter oil gas will certainly go up to multifunctional oil condensers to liquefy into oil and keep in the tank.

Step – 3

Cool down the Convert plastic to oil machine after the completion of Step-1 and Step-2. Once the heat reaches about 40 degree Celsius, the carbon black will be discharged automatically.

Pyrolysis Oil

convert plastic to oil

Pyrolysis oil application   
As industrial fuel for production of heat and electricity, raw material for manufacturing petrochemicals (petrol, diesel, base oil, lubricants etc)

Carbon Black

plastic to oil   

Carbon black application

Used as fuel in boiler/furnaces/cement plants, raw material for manufacturing carbon nano-tubes & activated carbon
Pyrolysis Gas    Used as fuel to heat the plastic to oil reactor. Excess gas can be used for production of petrochemicals or electricity

Inquiry more pyrolysis plant technology information

Leave a message to get more information about convert plastic to oil at home?.Our engineer will contact you ASAP to analysis pyrolysis plant project cost for you.

Why we are?

QRcode

    Scan QR code to communicate with our manager on WeChat